Metex Chamf drainage pipe chamfering tool – professional tool for deburring pvc drainage pipe
Pipegrip holding a pipe being chamfered with metex chamfer tool
Metex CMF110 Chamf drainage pipe chamfering tool shown mounted on a power drill held by human hands
Metex CMF110 Chamf drainage pipe chamfering tool – close-up of angled cutting edge for precise drainage pipe deburring
Metex CMF110 Chamf chamfering tool packaging - a green and white box
Metex Chamf drainage pipe chamfering tool rear side, showing the male spigot and the directional arrow for chamfering
Finished chamfered PVC drainage pipe showing the 15 degree chamfer applid by the Metex chamfer tool

Metex Pipe Chamfer Tool

SKU: CMF110

Applies industry standard 15 degree chamfer in 15-20 seconds
Works easily with any power drill
Suitable for any 110mm PVC pipes
Ideal for use with the Metex PipeGrip pipe clamp
Safe & quick chamfering method
WHERE TO BUY?
Browse our retailers

The Metex straight shank drill-mounted PVC drainage pipe chamfer tool is designed to create a clean, consistent pipe chamfer on 110mm plastic pipe, including drain and soil pipes. This 110mm pipe chamfer tool applies a 15 degree UK industry standard bevel to PVC pipe in 15-20 seconds, helping pipes locate smoothly into fittings and seals.

  • PVC 4 inch pipe chamfer tool
  • Works with any standard power drill or cordless drill by mounting the male spigot directly into the drill chuck
  • Use as guided by the directional arrows on the unit
  • Chamfer blades are fully welded for durability and not replaceable
  • Ideal for on site use with the Metex PipeGrip pipe clamp

MORE ABOUT THIS PRODUCT

  • SKU: CMF110
  • Weight: 375g
  • Dimensions: L120mm, W120mm, H110mm
  • Suitable for 110mm / 4" PVC drainage pipes
  • Works with any standard power drill or cordless drill
  • Designed to work with Metex Pipegrip pipe clamp

What is pipe chamfering used for?

Chamfering creates a slight bevel on the end of a PVC drainage pipe so it slides easily into fittings. It prevents damage to rubber seals, which helps avoid leaks. A chamfered edge also allows the pipe to seat fully and evenly for a more reliable connection, and makes installation quicker and easier, especially on push-fit systems.

How does the Metex pipe chamfer tool work?

Simply insert the male spigot into your power drill’s chuck and tighten, place it over the cut end of the pipe, and drill clockwise (follow the directional arrows on the tool). Apply steady pressure, never force the tool.

The tool will apply a chamfer at a UK industry standard 15 degree angle on the end of the PVC drainage pipe.

Will the Metex pipe chamfer tool work with any cordless drill?

Yes, any power drill with a standard chuck is good to use.

How long before the Metex chamfer tool blades are blunt, and is there a way of sharpening them?

We estimate these will last for 300+ uses, the blades can’t be replaced though and a new chamfer tool would need to be purchased when the blades are blunt and not ‘chamfering’ as intended.

What size pipe does the Metex pipe chamfer tool work with?

The Metex 110mm chamfer tool is designed specifically for 110mm / 4 inch PVC underground drainage and above ground PVC soil pipes.

Does the Metex pipe chamfer tool work with other pipe materials?

Chamf is designed to work mainly on 110mm PVC domestic pipe but will also work on MDPE, HDPE & HPPE. If you’re not sure please give us a call for guidance.

Related Articles

Chamfer tool in use by Ryan Mills

Case Study: A Game-Changer for Pipe Chamfering on Site

Read More
Metex chamfer tool in use on a drainage pipe held by Metex pipegrip pipe clamp

Chamfering Drainage Pipes: Quick Guide to Safer, Faster Methods

Read More

Image of the metex product catalogue with the text

Product Catalogue

Chamfer Tool for PVC Pipe

Faster, Cleaner Pipe Preparation

The Metex Pipe Chamfer Tool is a purpose-built chamfer tool for PVC drainage pipe, designed to make pipe preparation quicker, safer, and more consistent on site. It applies a precise 15-degree chamfer to 110mm PVC pipes, removing sharp edges and burrs that can cause problems during jointing.

Pipe chamfering is an essential step when working with soil pipes, drain pipes, and other 110mm PVC systems. A clean chamfer allows pipes to slide smoothly into rubber seals and fittings, helping to prevent seal damage, leaks, and unnecessary rework. With the Metex Chamfer Tool, each pipe can be prepared in just 15–20 seconds, saving time across every installation.

This chamfering tool for PVC pipe is designed for use with a standard corded or cordless power drill. The male spigot fits directly into the drill chuck, while clear directional arrows ensure correct operation and consistent results.

Featuring fully welded, non-replaceable chamfer blades, the tool is built for durability and low maintenance in demanding site environments. Ideal for plumbers, drainage installers, groundworkers, and civil contractors, it works particularly well alongside secure pipe holding solutions such as the Metex PipeGrip pipe clamp, improving control and safety during use.

If you’re looking for a professional chamfer tool for PVC pipe that delivers fast, reliable results on 110mm systems, the Metex Chamfer Tool is a proven, site-ready solution.